Speed ??limiter for electric scooters, model 3

Speed ??limiter for electric scooters, model 3

Speed ??limiter for electric scooters, model 3

Shop: Electric scooters
Category: Electronic
Reference: ELPALIMM3
Avaliable.
Do you want to receive The monday 31 of march?
Haz tu pedido antes de 11 horas 40 minutos y selecciona un servicio de transporte 24/48 horas.
Envíos en sábado solo para pedidos a España peninsular.
9,04 €
Sign up for more discounts. Additional benefits for professional customers.
Warn of some erroneous item information
You should keep in mind that the receiver (which must be mounted inside the scooter) works from 5V to 12V max. The connections are: Red = Positive. Black = Negative. White = Normally open. Yellow = Co [...]

You should keep in mind that the receiver (which must be mounted inside the scooter) works from 5V to 12V max.

The connections are:

Red = Positive.
Black = Negative.
White = Normally open.
Yellow = Common.
Blue = Normally closed.

Programming:

The relay with the remote control can be configured in the following modes:

Push-button mode: The relay remains active when the control is pressed, inactive when released.

Press the learning button 1 time. Then press the button on the controller, the indicator. If the LED on the board flashes 1 time and goes off, it has been configured correctly.

Switch mode: The relay is activated when the button is pressed once and deactivated when the button is pressed again.

Press the learning button 2 times. Then press the button on the controller, the led indicator flashes 2 times and turns off, which means successful learning.

Reset: Press the learning button 8 times until the Led indicator on the receiver flashes 8 times, which means the setting has been cleared (before changing the working mode you must clear the code first)