from Monday to Friday (except holidays) for orders of more than 30€ to mainland Spain/Portugal.
Shop: | 3D Printers |
Category: | Special Filaments |
Reference: | SMPLA7NT0A075 |
Smartfil ANTIBACTERIAL is a filament composed of PLA and silver nanoparticles that provide antibacterial properties to the material, preventing the growth of molds, fungi and all the bacteria that cause bad odors, discoloration, stains, deterioration and corrosion in the printed pieces.
The antibacterial effectiveness of this filament has been tested and certified in an external laboratory under the ISO 22196 standard. The test was carried out on two bacterial strains: Stapylococcus aureus and Escherichia coli. The results obtained indicate a 99.99% reduction of bacterial activity after 24 hours.
Chemical composition: Modified polylactic acid.
Density: 1.24 g/cm³
Glass transition temperature: 55-60 ºC
Tensile strength at break: 45.5 MPa
Tensile modulus: 31,800 MPA
Tensile elongation at break: ?5%.
Charpy impact strength (notched at 23 ºC): ?5KJ/m².
Thermal
Thermal deflection temperature (HDTB): 60 ºC
Printing
Printing temperature: 200-240º C
Bed temperature: 0-60 ºC
Coating fan: On (100%)
Roll size: Medium
Filament weight: 750 g
Gross weight: 975 g
Diameter: 1.75 mm / 2.85 mm
The item is delivered in a smart bag, a multilayer bag with an EVOH barrier and a highly effective zip closure. On its transparent base, you will be able to appreciate the color of the filament without opening the bag.